NTPT NTK BEARINGS CO.,LTD.
NTPT NTK BEARINGS CO.,LTD.
Angular contact ball bearing   Bearing unit   Complex bearing  
English
English
  • Home
  • Stock Categories
    • Angular contact ball bearing
    • Bearing unit
    • Complex bearing
    • Cylindrical roller bearing
    • Linear bearing
    • Needle bearing
    • Plain bearing
    • Self-aligning ball bearings
    • Spherical roller bearings
    • Tapered roller bearings
    • Thrust ball bearings
    • Thrust roller bearings
    • Wheel bearings
    • Ball bearing
    • A10vg63 Bearing
    • Nta 1625 Needle Thrust Bearing
    • Ina Axk 2035 Bearing
    • Timken 3420 Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Double Row Cylindrical Roller Bearings
    • Four Row Cylindrical Roller Bearings
    • Spherical Roller Bearings
    • Sealed Spherical Roller Bearings Continuous Casting Plants
    • Bearings For Metric And Inch Shaft Sizes
    • Thk Linear Guide
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
  • Technical Articles
  • Angular contact ball bearing
  • Bearing unit
  • Complex bearing
✖

Home

Stock Categories

Technical Articles

Angular contact ball bearing

Bearing unit

Complex bearing

Home>Products>Thk Miniature Linear Guide>HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3000/1]L THK Standard Linear Guide Accuracy and Preload Selectable HSR Series

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3000/1]L THK Standard Linear Guide Accuracy and Preload Selectable HSR Series
  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3000/1]L THK Standard Linear Guide Accuracy and Preload Selectable HSR Series

THK HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3000/1]L THK Standard Linear Guide Accuracy and Preload Selectable HSR Series

category

Thk Miniature Linear Guide

THK HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3 Bearing SPECIFICATIONS

  • QuestionHSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3000/1]L THK Standard Linear Guide Accuracy and Preload Selectable HSR Series NTPT NTK BEARINGS CO.,LTD. N/A Minimum Buy Quantity ? Find what you need faster by entering your 0.0 Inventory Thk Miniature Linear Guide information . Pillow Block Category

  • THK

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3

  • Pillow Block
  • 0.0
  • N/A
  • 22.246
  • M06288
  • 2
  • Concentric Collar
  • 2 Bolt Pillow Block
NTPT NTK BEARINGS CO.,LTD.

NTPT NTK BEARINGS CO.,LTD.China

  • NTPT NTK BEARINGS CO.,LTD.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3000/1]L THK Standard Linear Guide Accuracy and Preload Selectable HSR Series Code system

  • Pillow Block
  • 0.0
  • N/A
  • 22.246
  • M06288
  • 2
  • Concentric Collar
  • 2 Bolt Pillow Block
  • Spherical Roller Bearing
  • Cast Steel
  • Expansion
  • 1 Inch
  • Yes
  • 22220
  • Triple Lip Urethane
  • 1 Piece Solid
  • Inch
  • Double Row | Single Collar | With Set Screw
  • 2 Bolt Pillow Block; 3-15/16" Bore; 4-1/4" Base to Center Height; Concentric Collar Mount; Spherical Roller Bearing; 10.04" Minimum Bolt Spacing; 12.6" Bolt Spacing Maximum; Relubr
  • 31171511
  • 8483.20.40.80
  • Bearing
  • Pillow Block
  • QAPL20A315SEO
  • 59
  • 4.25 Inch | 107.95 Millimeter
  • 3.938 Inch | 100.025 Millimeter
  • 11.3 Inch | 287 Millimeter
  • 0 Inch | 0Millimeter
  • 4.6 Inch | 116.84 Millimeter
  • 10.04 Inch | 255.016Millimeter
  • 12.6 Inch | 320.04Millimeter

THK HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3 HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3000/1]L THK Standard Linear Guide Accuracy and Preload Selectable HSR Series Dimensions

H219 mm
Basic static load rating C019 kN
H99 mm
A48 mm
Recommended tightening torque for grub screw7.4 N·m
N114 mm
J max.146 mm
B142.9 mm
J135.5 mm
L175 mm
HousingSY 508 M/VZ033
Limiting speed950 r/min
s125.9 mm
N24.5 mm
Recommended diameter for attachment bolts, mm G12 mm
Thread grub screw G2M6
J6161 mm
A130 mm
Hexagonal key size for grub screw N3 mm
d38.1 mm

Not exactly HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3000/1]L THK Standard Linear Guide Accuracy and Preload Selectable HSR Series you want?

No.BranddDCbBFwC0B1
15BM2116KOYO1521 mm13,4 kN - - 15 mm24,2 kN -
15BTM2116KOYO1521 mm9,8 kN - - 15 mm13,6 kN -
15MKM2116KOYO1521 mm9,8 kN13,3 mm - 15 mm13,6 kN -
15MM2116KOYO1521 mm13,4 kN13,7 mm - 15 mm24,2 kN -
Z-531167.04.DRGLFAG380 mm960 mm243 mm - 315 mm - - 335 mm
Z-531168.04.DRGLFAG400 mm1 010 mm258 mm - 330 mm - - 350 mm
YT 2116IKO2129 mm22,1 kN - - 21 mm35,2 kN -
ZA-40BWD17DCA116**NSK40 mm75 mm39 mm19,5 mm39 mm - - -
ZA-40BWD17ECA116**NSK40 mm75 mm39 mm19,5 mm39 mm - - -
Z-531160.04.DRGLFAG260 mm680 mm170 mm - 233 mm - - 248 mm
Z-531162.04.DRGLFAG280 mm700 mm180 mm - 233 mm - - 248 mm

 

3HR2042M+[93-1000/1]L[H,​P,​SP,​UP][F(AP-C),​F(AP-CF),​F(AP-HC)]M THK Separated Linear Guide Side Rails Set Model HRRG:1 NPT; P120°:260 kN; H:473.075 mm; Da:399.999 mm; H2:95.25 mm; Cap bolt recommended tightening torque:4284.4 N·m; R1:130.175 mm; Mass pillow block:342 kg; R2:46.831 mm; A1:222.25 mm; Ca:117.805 mm; Appropriate attachment bolt size G:1.5 in; End plug (suffix Y):X-5217-2; P60°:691 kN
3HR2042M+[93-1000/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]M THK Separated Linear Guide Side Rails Set Model HRr, r1,2 min.:1.1 mm; B:63 mm; Mass inner ring:1.05 kg; d:85 mm; F:100 mm;
3HR2042M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[93-1000/1]L[H,​P,​SP,​UP]M THK Separated Linear Guide Side Rails Set Model HRBasic dynamic load rating C:1140 kN; dk:105 mm; w:88 mm; r1 min.:1 mm; d4 ≈:105 mm; B:55 mm; d2 max.:182 mm; l3 min.:85 mm; l4 max.:324 mm; d:80 mm; Mass rod end:15 kg; Basic static load rating C0:655 kN; G:M 64x4; C1 max.:48 mm; l5 ≈:45 mm; Specific dynamic load factor K:300 N/mm²;
3HR1530M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[70-800/1]LM THK Separated Linear Guide Side Rails Set Model HROil Speed Rating Open/Shielded n2:5600 rpm; B:13.00 mm; Accessories:Two Seals; Basic Static Radial Load Rating Co:22000 N; Basic Dynamic Radial Load Rating C:20300 N; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:4800 rpm; D:125.0000 mm; Sealed Speed Rating n3:3000 rpm; d:100.000 mm
3HR2042M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[93-1000/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]M THK Separated Linear Guide Side Rails Set Model HRH2:33.337 mm; Attachment bolt diameter G:15.875 mm; J max.:180.975 mm; Mass bearing unit:4.22 kg; J min.:174.625 mm; Limiting speed:5300 r/min; Basic dynamic load rating C:77 kN; d2:68.659 mm; A1:80.169 mm; s:25.4 mm; A:63.5 mm; L:225.425 mm; S:0.794 mm; B:73.025 mm; H1:57.15 mm; da:44.45 mm; H:114.
3HR1530M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[70-800/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]M THK Separated Linear Guide Side Rails Set Model HRs1:47.6 mm; d:74.613 mm; B4:12 mm; Basic static load rating C0:53 kN; A:78 mm; R1:5.5 mm; Housing:SY 516 U; Limiting speed:2400 r/min; Thread grub screw G2:7/16-20 UNF; Fatigue load limit Pu:2.16 kN; SWN:11.113 mm; J min.:216 mm; J max.:241 mm; H1:88.9 mm; N4:3 mm; Recommended diameter for attachmen
2SRS15GM[DD,​DDHH,​SS,​SSHH,​UU]C1+[44-1000/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectableda:190 mm; Cap bolt:1 1/8-7 UNC; PG:1/4 NPT; Labyrinth ring (dc shaft position):LOR 160; R1:120.65 mm; R2:42.069 mm; Initial grease fill:1672.65 g; Stabilizing ring:SR-38-32; P120°:151 kN; Housing:SSAFS 238; h:61.913 mm; P180°:160 kN; A1:190.5 mm; Labyrinth ring (db shaft position):LOR 171;
3HR2042M+[93-1000/1]L[H,​P,​SP,​UP]M THK Separated Linear Guide Side Rails Set Model HROil Speed Rating Open/Shielded n2:11000 rpm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:6300 rpm; Accessories:Metal Shields; D:72.0000 mm; B:30.16 mm; d:30.000 mm; Basic Static Radial Load Rating Co:16600 N; Grease Speed Rating Open/Shielded n1:9000 rpm; Basic Dynamic Radial Load Rating C:2960
3HR2042M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[93-1000/1]L[H,​P,​SP,​UP][F(AP-C),​F(AP-CF),​F(AP-HC)]M THK Separated Linear Guide Side Rails Set Model HRTolerance shaft:e7; Specific dynamic load factor K:25 N/mm²; Tolerance housing:H7; h:15 mm; B:12 mm; α:105 °; Coefficient of friction µ min.:0.08; d:14 mm; D1:25 mm; Mass bushing:0.022 kg; Specific static load factor K0:45 N/mm²; a:3 mm; Permissible sliding velocity v max.:0.5 m/
3HR1530M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[70-800/1]L[H,​P,​SP,​UP]M THK Separated Linear Guide Side Rails Set Model HRP120°:87.2 kN; Mass pillow block:82.3 kg; Cap bolt recommended tightening torque:203.4 N·m; L:539.75 mm; S:4.763 mm; J min.:431.8 mm; Pa:62.3 kN; Cap bolt:4 x 3/4-10 UNC; h:50.8 mm; H2:63.5 mm; R1:95.25 mm; End plug (suffix Y):EPR 17; Initial grease fill:623.7 g; PG:1/4 NPT; N1:28.575 mm;
3HR2042M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[93-1000/1]LM THK Separated Linear Guide Side Rails Set Model HRAccessories:Two Shields; Grease Speed Rating Open/Shielded n1:2600 rpm; D:215.0000 mm; Basic Static Radial Load Rating Co:73500 N; d:170.000 mm; Basic Dynamic Radial Load Rating C:61800 N; B:22.00 mm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:0 rpm; Oil Speed Rating Open/Shielded n2:3200 rpm;
3HR1530M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[70-800/1]L[H,​P,​SP,​UP][F(AP-C),​F(AP-CF),​F(AP-HC)]M THK Separated Linear Guide Side Rails Set Model HRTaconite seal:TER 584; H:474.663 mm; Max. speed for Taconite seal:385 r/min; Da:399.999 mm; R2:46.831 mm; P180°:285 kN; Adapter sleeve assembly:SNW 44x7.1/2; A1:222.25 mm; Eye bolt:2 x 1/2-13 UNC; R1:130.175 mm; H2:95.25 mm; End plug (suffix Y):EPR 23; Initial grease fill:2749.95 g; Mass pillow

 

 

HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3000/1]L THK Standard Linear Guide Accuracy and Preload Selectable HSR Series Video

 

THK HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3 INTERCHANGE

Thk Miniature Linear Guide Part series HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3 is a potential replacement for these common bearing part numbers:

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3

  • HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3

Contact Us

NTPT NTK BEARINGS CO.,LTD.
Address478/673 Moo1 Tambon Nongkham Amphur Sriracha Chonburi34286,Tailândia
Phone(Working Time)129-837-7564
Fax
  • NTPT NTK BEARINGS CO.,LTD.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

THK HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3 Technical Articles

240x500x155 bearing price list
INA LSL192348 Bearing 240x500x155 Cylindrical RollerPart Number LSL192348 Cylindrical Roller Bearings (INA) Old Code bearing Dimensions (mm) Inside diameter ID d 240 Outside diameter OD D 500 Thickness  NSK 32348 Bearing 240x500x155 Tapered Roller...
320x480x160 bearing catalogue
Deep groove ball bearing 24064-RR-KOYO - 320x480x160 mmDeep groove ball bearing 24064-RR-KOYO , dim : Ø int. 320 x Ø ext. 480 x th. 160 mm. SAME DAY SHIPPING. The specialist at your service for over 10 years 24064RK30 KOYO Bearing | 24064RK30...
50x110x54 bearing number and size chart pdf
NSK 7310C/DB bearing 50x110x54 236310 | Angular ContactEnquiry NSK 7310C/DB Angular Contact Ball Bearings from bearingforworld, 236310 demensions: 50x110x54 Bearings Online Deep groove ball bearing ZKLN50110-2Z-INA - 50x110x54 mmDeep groove ball...

Thk Miniature Linear Guide CATEGORIES

  • Angular contact ball bearing
  • Bearing unit
  • Complex bearing
  • Cylindrical roller bearing
  • Linear bearing
  • Needle bearing
  • Plain bearing
  • Self-aligning ball bearings
  • Spherical roller bearings
  • Tapered roller bearings
  • Thrust ball bearings
  • Thrust roller bearings
  • Wheel bearings
  • Ball bearing
  • A10vg63 Bearing
  • Nta 1625 Needle Thrust Bearing
  • Ina Axk 2035 Bearing
  • Timken 3420 Bearing
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Kaydon Slewing Bearing
  • Bearing Slewing Ring
  • Double Row Cylindrical Roller Bearings
  • Four Row Cylindrical Roller Bearings
  • Spherical Roller Bearings
  • Sealed Spherical Roller Bearings Continuous Casting Plants
  • Bearings For Metric And Inch Shaft Sizes
  • Thk Linear Guide
  • Thk Miniature Linear Guide
  • Thk Linear Guide Rails
  • High Temperature Linear Guide
  • Curved Linear Guide
  • Thk Linear Bearings And Rails
  • Thk Linear Motion
More

Customers Who Viewed THK HSR25LA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]+[116-3 Bearing Also Viewed

  • 3HR2042M+[93-1000/1]L[H,​P,​SP,​UP]M THK Separated Linear Guide Side Rails Set Model HR
  • 3HR2042M+[93-1000/1]L[H,​P,​SP,​UP][F(AP-C),​F(AP-CF),​F(AP-HC)]M THK Separated Linear Guide Side Rails Set Model HR
  • 3HR2042M+[93-1000/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]M THK Separated Linear Guide Side Rails Set Model HR
  • 3HR2042M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[93-1000/1]LM THK Separated Linear Guide Side Rails Set Model HR
  • 3HR2042M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[93-1000/1]L[H,​P,​SP,​UP]M THK Separated Linear Guide Side Rails Set Model HR

Top Products

NBS KBH 10-PP Linear bearing 60 mm x 150 mm x 35 mm NTN NF412 Cylindrical roller bearing NACHI UCFL308 Bearing unit
KOYO RAXZ 525 Complex bearing Timken lm104911 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

NTPT NTK BEARINGS CO.,LTD.. Copyright © 2017 - 2022 All Rights Reserved.

  • Home
  • Stock Categories
    • Angular contact ball bearing
    • Bearing unit
    • Complex bearing
    • Cylindrical roller bearing
    • Linear bearing
    • Needle bearing
    • Plain bearing
    • Self-aligning ball bearings
    • Spherical roller bearings
    • Tapered roller bearings
    • Thrust ball bearings
    • Thrust roller bearings
    • Wheel bearings
    • Ball bearing
    • A10vg63 Bearing
    • Nta 1625 Needle Thrust Bearing
    • Ina Axk 2035 Bearing
    • Timken 3420 Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Double Row Cylindrical Roller Bearings
    • Four Row Cylindrical Roller Bearings
    • Spherical Roller Bearings
    • Sealed Spherical Roller Bearings Continuous Casting Plants
    • Bearings For Metric And Inch Shaft Sizes
    • Thk Linear Guide
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
  • Technical Articles
  • Angular contact ball bearing
  • Bearing unit
  • Complex bearing
✖

Home

Stock Categories

Technical Articles

Angular contact ball bearing

Bearing unit

Complex bearing

Contact Us